If you already have an account, please click the link below to enter your email to receive a code to login.
This is a dedicated wholesale site. Please click on the link below to access the consumer website. https://prvaudio.com/ https://timpanoaudio.com/
PRV RS8-SUBD4 Subwoofer
PRV RS8-SUBD4 Subwoofer
SKU: SKU:
- 8" Car Subwoofer
- 14.5 mm Xmax
- 500 Watts Dual 4 Ohm
In stock
- 8" Car Subwoofer
- 14.5 mm Xmax
- 500 Watts Dual 4 Ohm
Free Shipping available on orders over $1,500.00 in the U.S.
Features
For 15 years, PRV Audio has developed and marketed live PRO audio speakers, and is thrilled to introduce the RS Series bringing new Subwoofers, amplifiers and car speakers with high-fidelity sound and performance for your everyday car system, specifically designed and developed for the car audio market.
Add pure lows to your system, this 8″ car subwoofer RS8-SUB delivers responsive bass, thanks to its high Xmax. This sub was engineered and built with performance in mind, for pickup trucks, or any car you want to put a subwoofer in without sacrificing trunk space.
- Optimized for use in compact enclosures this subwoofer is ideal for under or behind seat truck boxes
- 4 layer high-temperature copper voice coil capable of handling 500 watts RMS program power, which makes high acoustic output
- High roll U surround gives an 14.5 mm of Xmax for low bass reproduction without any issues
- Side forced cooling system with vented back plate design for better heat dissipation
- Dual 4 Ohm, easy setup to connect two subs in parallel to 1 ohm
This subwoofer features a beefy magnet motor that enhances its power and bass response, allowing it to handle more power and produce richer, fuller bass tones. Its double magnet motor allows for a remarkable 14.5mm Xmax, delivering high excursion equivalent to bigger size subwoofers
In this beefy 8″ sub, can reach 1.30″ peak to peak excursion before damage! Which allows for deep low frequency bass!
PRV 8” Car Subwoofer RS8-SUB Dual 4 Ohm 500 Watts Double Stacked Magnet 14.5mm Xmax
Recommended Amplifier configurations:
- 1 Subwoofer – 1x RS500 BASS 2 Ohm, one sub in parallel
- 2 Subwoofers – 1x RS900 BASS 1 Ohm, both subs in parallel
The LPF on amplifiers should be set between 80 – 100 Hz when using musical power up to 500 Watts RMS, Subsonic filters should be set according to music style, this will help to avoid subwoofer damage from excess excursion caused by ultra low frequencies.
Take your time and break them in! A brand-new sub is always a little stiff but after break-in, the subwoofer soft parts will stretch out! This means with less power you will create the same output with more extended low bass tones.
Single Sub Sealed Enclosure 55 Hz Tunning
All sealed-enclosures should be filled to 50% of poly-fil.
Volume | Box Suggestion | Port Size |
---|---|---|
0.54 ft3 | 11”x10”x8.5” | N/A |
Volume | Box Suggestion | Port Size |
---|---|---|
0.78 ft3 | 9”x15”x10” | Slot Port 9”x1.25” by 21″ Deep |
Volume | Box Suggestion | Port Size |
---|---|---|
1.85 ft3 | 10”x23”x14" | Slot Port 10”x2.5” by 28″ Deep |
Technical Details
- Nominal Diameter 8″ (203 mm)
- Nominal Impedance 4 + 4 Ohm
- Nominal Power Handling* 250 Watts
- Continuous Program Power (RMS)** 500 Watts
- Max Peak Power*** 1000 Watts
- Sensitivity 1.41V at 1m82 dB (Parallel VC)
- Voice Coil Diameter 2.4″ (61.1 mm)
- Voice Coil Wire Copper
- Voice Coil Winding Depth33.0 mm
- Former Material Black Aluminum
- Magnetic Gap Depth 8.0 mm
- Frame Material Stamped Steel
- Equivalent Volume
- Vas
- 3.79 l
- Excursion (mathematical)**
- Xmax
- 14.5 mm
- Free Air Resonance
- Fs
- 53.4 Hz
- Mechanical Factor
- Qms
- 8.13
- Electrical Factor
- Qes
- 0.82
- Total Factor
- Qts
- 0.75
- Cone Area
- Sd
- 201 cm²
- Mechanical Mass
- Mms
- 132.2 g
- BI Factor
- Bl
- 9.55 Tm
- Dc Resistance
- Re
- 1.7 Ohm
- Inductance
- Le
- 1.24 mH at 1 kHz
- Mechanical Mass Without Air
- Mmd
- 130.6 g
- Mechanical Compliance
- Cms
- 0.06 mm/N
- Overall Depth 5.79″ (147 mm)
- Mounting Depth 4.96″ (126 mm)
- Overall Diameter 8.58″ (218 mm)
- Front Mount Baffle Cutout 7.40″ (188 mm)
- Net Weight 17.78 Lbs (6.25 kg)
- Shipping Weight 15.43 Lbs (7.00 kg)
- Carton Dimensions WxLxH 9.25″ x 9.25″ x 6.89″ (235 x 235 x 175 mm)
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.
Repair Parts
-
Rubber Cement Speaker Glue
BLACK CEMENT GLUE
Price:Regular price $19.99Regular priceUnit price / perOut of Stock -
PRV RKRS8-SUBD4
RKRS8-SUBD4
Price:Regular price $44.91Regular priceUnit price / per$56.14Sale price $44.91Out of Stock