If you already have an account, please click the link below to enter your email to receive a code to login.
This is a dedicated wholesale site. Please click on the link below to access the consumer website. https://prvaudio.com/ https://timpanoaudio.com/
PRV 6MR500-NDY-4 Midrange
PRV 6MR500-NDY-4 Midrange
SKU: SKU:6MR500-NDY-4
PRV 6MR500-NDY-4 Midrange
PRV 6MR500-NDY-4 Midrange
SKU: SKU:6MR500-NDY-4
- 6.5" Midrange - 4 Ohm
- Neodymium Magnet
- 96 dB - 500 Watts
In stock
Couldn't load pickup availability
- 6.5" Midrange - 4 Ohm
- Neodymium Magnet
- 96 dB - 500 Watts
Free Shipping available on orders over $1,500.00 in the U.S.
Features
There is no doubt that the 6MR500-NDY-4 is one of the best midrange loudspeakers for audio professionals. It offers excellent durability and a smooth full-range response up to 13,000 Hz.
Combined with other fine materials, this high-energy, rare-earth neodymium motor magnet assembly resolves fine details in audio, which is a high-end requirement for audiophiles in car audio and motorcycle custom builders. Great addition to the MR Neo Series!
You can expect an excellent sound stage and realistic sound reproduction with this loudspeaker’s wide coverage and transient response. This refers to the ability to accurately reproduce rapid changes in sound, contributing to a high-quality audio experience.
- Great as Motorcycle, OEM replacement Door speaker.
- Built for loud and clear vocal performance in tight, compact spaces
- 500 Watts RMS power rating produces high acoustic output
- 2″ DUAL layer CCAW voice coil wound on Kapton former, 4 Ohm
- Fast transient response, minimal tonal coloration, and a deep, dynamic midbass
- Also available in 8 Ohm – 6MR500-NDY
The powerful neodymium slug magnet assembly ensures high flux concentrations. Its magnetic structure significantly improves heat dissipation. This increases power handling and lowers power compression, with an optimal power-to-weight ratio.
Everything about this speaker is designed for reliable and consistent high output levels even when driven to its limit. This allows you to achieve high fidelity sound at low distortion with the most enjoyable possible listening experience.
PRV 6.5″ Midrange Speaker 6MR500-NDY-4 500 Watts / 4 Ohm – High Power Neodymium PRO Audio Loudspeaker
Recommended Amplifier configurations and crossover points:
2 Speakers – 1x MDX1200.2 1 Ohm, 2 speakers in parallel on bridged channel
4 Speakers – 1x MDX2500.1 1 Ohm, 4 speakers in parallel
Recommended HPF using PRV Digital Signal Processor DSP when using up to 600 Watts RMS musical power
- 220 Hz at 12 dB per octave filter Crossover / BT12
- 180 Hz at 18 dB per octave filter Crossover / BT18
If you have compression drivers on your system the recommended LPF is 5,000 at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.
Technical Details
GENERAL SPECIFICATIONS

*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation.
***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.
- Nominal Diameter 6″ (152 mm)
- Nominal Impedance 4 Ohm
- Nominal Power Handling* 250 Watts
- Continuous Program Power (RMS)** 500 Watts
- Max Peak Power*** 1000 Watts
- Sensitivity 2.83V at 1m96 dB
- Recommended Hi Pass Crossover" "For Full Power Handling 220 Hz** **12db Per Octave Crossover
- Frequency Response at -10dB 90 – 13,000 Hz
- Voice Coil Diameter 2″ (50 mm)
- Voice Coil Wire CCAW
- Voice Coil Winding Depth11.2 mm
- Former Material Kapton
- Magnetic Gap Depth 5.5 mm
- Frame Material Die Cast Aluminum
- Magnet Type Neodymium
THIELE-SMALL PARAMETERS
- Equivalent Volume
- Vas
- 5.14 l
- Excursion (mathematical)**
- Xmax
- 4.42 mm
- Free Air Resonance
- Fs
- 99.8 Hz
- Mechanical Factor
- Qms
- 23.1
- Electrical Factor
- Qes
- 0.47
- Total Factor
- Qts
- 0.43
- Cone Area
- Sd
- 143 cm²
- Mechanical Mass
- Mms
- 14.14 g
- BI Factor
- Bl
- 8.77 Tm
- Dc Resistance
- Re
- 3.8 Ohm
- Inductance
- Le
- 0.05 mH at 1 kHz
- Mechanical Mass Without Air
- Mmd
- 13.17 g
- Mechanical Compliance
- Cms
- 0.180 mm/N
EXTRA INFO
- Overall Depth 3.22″ (82 mm)
- Mounting Depth 2.91″ (74 mm)
- Overall Diameter 6.47″ (164.5 mm)
- Front Mount Baffle Cutout 5.59″ (142 mm)
- Net Weight 3.34 Lbs (1.51 kg)
- Shipping Weight 3.64 Lbs (1.65 kg)
- Carton Dimensions WxLxH 7.09″ x 7.09″ x 4.37″ (155 x 155 x 95 mm)
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.
Repair Parts
-
Rubber Cement Speaker Glue
BLACK CEMENT GLUE
Price:Regular price $19.99Regular priceUnit price / perOut of Stock -
PRV RK6MR500-NDY-4
RK6MR500-NDY-4
Price:Regular price $44.41Regular priceUnit price / per$53.29Sale price $44.41Sale