If you already have an account, please click the link below to enter your email to receive a code to login.
This is a dedicated wholesale site. Please click on the link below to access the consumer website. https://prvaudio.com/ https://timpanoaudio.com/
PRV 8MB700FT-NDY-4 Midbass
PRV 8MB700FT-NDY-4 Midbass
SKU: SKU:8MB700FT-NDY-4
PRV 8MB700FT-NDY-4 Midbass
PRV 8MB700FT-NDY-4 Midbass
SKU: SKU:8MB700FT-NDY-4
- 8" Mid Bass - 4 Ohm
- Neodymium Magnet
- 98 dB - 700 Watts
In stock
- 8" Mid Bass - 4 Ohm
- Neodymium Magnet
- 98 dB - 700 Watts
Free Shipping available on orders over $1,500.00 in the U.S.
Features
PRV Audio’s 8MB700FT-NDY-4 Forte Series was specially tailored to give you more power handling and less distortion. The larger voice coil ensures high heat dissipation and the necessary Bl to deliver high sensitivity even on high power with the minimum distortion.
The lower Qts allows for more precise mid-bass. Superior fidelity is achieved through a perfect combination of a non-pressed cone with a smooth frequency response and a surrounding ring specially designed to allow high displacement without increasing the distortion.
- 2.5" Voice Coil - More power handling and less distortion on mid low midbass frequencies
- Its powerful optimized neodymium motor is vented to provide excellent cooling.
- 8" Car audio Midbass speaker designed for Low Frequencies at High Power - 4 Ohm
- 700 watts RMS program power gives capability of high acoustical output.
- Also Available at 8 Ohm
To get superior fidelity, the special composite cone is built with non-pressed paper for reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.
This 8″ is a great midbass option for high SPL automotive systems, custom doors, car audio fiberglass enclosures where extremely high output is required.
This midbass will stand up to years of serious professional use! Thanks to its special composed spider reduces distortion at a high excursion and double roll surround keep cone travel linear at high excursion.
The 8MB700FT-Ndy-4 is an extremely efficient 8″ midbass from PRV Audio. Due to its wide frequency band and 98 dB sensitivity rating, this speaker is ideal for pairing with compression drivers, on 3-Way system, when used with recommended HPF using PRV Digital Signal Processor DSP
- 95 Hz at 12 dB per octave filter Crossover / BT12
- 85 Hz at 18 dB per octave filter Crossover / BT18
Technical Details
*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation.
***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.
- Nominal Diameter 8″ (203 mm)
- Nominal Impedance 4 Ohm
- Nominal Power Handling* 350 Watts
- Continuous Program Power (RMS)** 700 Watts
- Max Peak Power*** 1400 Watts
- Sensitivity 2.83V at 1m98 dB
- Recommended Hi Pass Crossover" "For Full Power Handling 95 Hz 12db Per Octave Crossover
- Frequency Response at -10dB 70 – 5,600 Hz
- Voice Coil Diameter 2.5″ (63 mm)
- Voice Coil Wire CCAW
- Voice Coil Winding Depth11.5 mm
- Former Material Fiber Glass
- Magnetic Gap Depth 8.00 mm
- Frame Material Die Cast Aluminum
- Magnet Type Neodymium
- Equivalent Volume
- Vas
- 24.97 l
- Excursion (mathematical)**
- Xmax
- 3.75 mm
- Free Air Resonance
- Fs
- 59.6 Hz
- Mechanical Factor
- Qms
- 3.81
- Electrical Factor
- Qes
- 0.24
- Total Factor
- Qts
- 0.22
- Cone Area
- Sd
- 249 cm²
- Mechanical Mass
- Mms
- 24.67 g
- BI Factor
- Bl
- 11.30 Tm
- Dc Resistance
- Re
- 3.3 Ohm
- Inductance
- Le
- 0.266 mH at 1 kHz
- Mechanical Mass Without Air
- Mmd
- 22.45 g
- Mechanical Compliance
- Cms
- 0.288 mm/N
- Overall Depth 4.00” (101.5 mm)
- Mounting Depth 3.66” (93 mm)
- Overall Diameter 8.20” (208.5 mm)
- Front Mount Baffle Cutout 7.30” (185.5 mm)
- Net Weight 4.32 Lbs (1.96 kg)
- Shipping Weight 5.51 Lbs (2.50 kg)
- Carton Dimensions WxLxH 9.05” x 9.05” x 5.11” (230 x 230 x 130 mm)
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.