Welcome to the new Dealer Portal for PRV Audio Group!

If you already have an account, please click the link below to enter your email to receive a code to login.

Log In

This is a dedicated wholesale site. Please click on the link below to access the consumer website. https://prvaudio.com/ https://timpanoaudio.com/

New

PRV 8MB500-4 Midbass

PRV 8MB500-4 Midbass

SKU: 8MB500-4
New

PRV 8MB500-4 Midbass

PRV 8MB500-4 Midbass

SKU: 8MB500-4

  • 8” Midbass – 4 Ohm
  • Ferrite Magnet
  • 95 dB – 500 Watts
$39.91
$49.89

In stock
  • 8” Midbass – 4 Ohm
  • Ferrite Magnet
  • 95 dB – 500 Watts

Free Shipping available on orders over $1,500.00 in the U.S.

View full details

Features

The 8MB500 was designed to provide outstanding durability and strong midbass punch. This 8″ midbass car speaker is purpose-built to cover the critical low frequency range in a custom car stereo setup.

Optimized to work great as a door speaker in car audio applications. If you need a speaker at 8 Ohm for a large custom door panel, we have the 8MB500.

  • A deep and punchy midbass response along with a strong vocal response
  • Car audio midbass speaker that offers smooth lower response through a punchy mid bass range
  • Natural paper cone and cloth triple roll surround for smooth response
  • Handles 500 Watts, guaranteeing endurance at loudest volumes
  • Impressive choice for high output custom car audio systems – 4 Ohm impedance

The latest technology enables us to increase the magnet field dramatically without using huge magnets, making this midbass one of a kind, with a large motor diameter that is not bulky, yet is capable of handling high power!

This is a great choice for a 3-way system, where you can combine a super tweeter with a subwoofer to get a full spectrum of audio.

Built with premium components to ensure absolute high sound fidelity, one of which is its compact push terminals, which connect to its silver tinsel lead wires attached to its high temperature CCAW voice coil.

Featuring a naturally damp paper cone and special coated dust cap, it makes this midbass speaker able to cover a wide range of frequencies from 75 Hz to 7,500 Hz.

Developed to perform well in tight enclosures, its triple roll surround keeps its cone travel linear at high mibdass excursion. Using the right combination of cone and suspension, this speaker is able to reproduce human vocals with dynamic midbass punch.

PRV 8″ Midbass Speaker 8MB500-4 Car Audio 500 Watts / 4 Ohm

Recommended Amplifier configurations and crossover points:

2 Speakers – 1x MDX1200.2 1 Ohm, Bridged both speakers in parallel
4 Speakers – 1x MDX1800.1 1 Ohm, 4 speakers in parallel

Recommended HPF using PRV Digital Signal Processor DSP when using up to 500 Watts RMS musical power

  • 95 Hz at 12 dB per octave filter Crossover / BT12
  • 85 Hz at 18 dB per octave filter Crossover / BT18

If you have a super tweeter on your system the recommended LPF is 7,500 at 18 dB per octave filter Crossover / LR18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.

Technical Details

GENERAL SPECIFICATIONS

*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.

**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation.

***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.

  • Nominal Diameter 8″ (203 mm)
  • Nominal Impedance 4 Ohm
  • Nominal Power Handling* 250 Watts
  • Continuous Program Power (RMS)** 500 Watts
  • Program Power*** 500 Watts
  • Max Peak Power*** 1000 Watts
  • Sensitivity 2.83V at 1m95 dB
  • Recommended Hi Pass Crossover" "For Full Power Handling 95Hz** **12db Per Octave Crossover
  • Frequency Response at -10dB 75 – 7,500 Hz
  • Voice Coil Diameter 2″ (50 mm)
  • Voice Coil Wire CCAW
  • Voice Coil Winding Depth12.0 mm
  • Former Material Kapton
  • Magnetic Gap Depth 6.0 mm
  • Frame Material Stamped Steel
  • Magnet Type Ferrite

THIELE-SMALL PARAMETERS

  • Equivalent Volume
    • Vas
    • 17.25 l
  • Excursion (mathematical)**
    • Xmax
    • 4.50 mm
  • Free Air Resonance
    • Fs
    • 72.02 Hz
  • Mechanical Factor
    • Qms
    • 25.59
  • Electrical Factor
    • Qes
    • 0.66
  • Total Factor
    • Qts
    • 0.64
  • Cone Area
    • Sd
    • 241 cm²
  • Mechanical Mass
    • Mms
    • 22.87 g
  • BI Factor
    • Bl
    • 7.52 Tm
  • Dc Resistance
    • Re
    • 3.6 Ohm
  • Inductance
    • Le
    • 0.20 mH at 1 kHz
  • Mechanical Mass Without Air
    • Mmd
    • 20.76 g
  • Mechanical Compliance
    • Mms
    • 22.87 g
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

PRV 8MB500-4 Midbass DATASHEET Download
  • Overall Depth 3.62" (92 mm)
  • Mounting Depth 3.32" (85 mm)
  • Overall Diameter 8.25" (209.5 mm)
  • Front Mount Baffle Cutout 7.12" (182 mm)
  • Net Weight 5.55 Lbs (2.52 kg)
  • Shipping Weight 6.15 Lbs (2.78 kg)
  • Carton Dimensions WxLxH 9.84″ x 9.84″ x 4.33″ (250 x 250 x 110 mm)
PRV 8MB500-4 Midbass DATASHEET Download

WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.