Welcome to the new Dealer Portal for PRV Audio Group!

If you already have an account, please click the link below to enter your email to receive a code to login.

Log In

This is a dedicated wholesale site. Please click on the link below to access the consumer website. https://prvaudio.com/ https://timpanoaudio.com/

PRV MT6CX580-NDY-4 Coaxial

PRV MT6CX580-NDY-4 Coaxial

SKU: MT6CX580-NDY-4

PRV MT6CX580-NDY-4 Coaxial

PRV MT6CX580-NDY-4 Coaxial

SKU: MT6CX580-NDY-4

  • 6.5″ Coaxial – 4 Ohm
  • Neodymium Magnet
  • 94/106 dB – 580 Watts
$239.91
$287.89

In stock
  • 6.5″ Coaxial – 4 Ohm
  • Neodymium Magnet
  • 94/106 dB – 580 Watts

Free Shipping available on orders over $1,500.00 in the U.S.

View full details

Features

PRV Audio is proud to present our MT6CX580-NDY-4 Coaxial Speaker from the MOTO Series (MT), high performance PRO audio line dedicated to motorsports installations.

This coaxial speaker is an easy fit and does not require an additional tweeter. Made from the highest quality materials and components to resist weather conditions and provide an easy and simple bolt on installation that transforms your system into the best sound reproduction available by replacing your factory speaker.

This 2-way coaxial loudspeaker established the new benchmark for vocal reproduction for outdoor applications, making it ideal for improving the sound system in your boat, UTV, 4 wheeler, Slingshot or Motorcycle.

  • Waterproof treated paper cone and surround stand up to the harshest conditions with true PRO audio performance
  • Full Range Sound, 2-Way coaxial with low frequency speaker combined with 1″ exit Titanium driver, able to respond from 100 Hz all the way up to 20,000 Hz
  • High Output Speaker for 4 Wheelers, Slingshots, and Motorcycles that mounts practically in almost every stock location
  • Common Neodymium motor design for both low frequency and high frequency, reducing phase problems and providing the smallest profile without sacrificing performance
  • 6.5″ High performance coaxial speaker Built to Perform! Capable of high output levels, with separated midbass speaker and horn driver for two amplifier installation.

This coaxial features a built-in horn driver with D280Ti titanium diaphragm on a 70° conical wide coverage horn waveguide.

Its horn features a screw-on design to make it easy for the speaker to be serviced. Made from the toughest PM-4 Polycarbonate high wear-resistance material to ensure long life on its treads.

It is capable of reproducing the highest frequencies at easy covering a wide range, phasing up perfect with its low frequency speaker.

This low frequency speaker can keep up with its high frequency drivers thanks to its large voice coil and extreme sensitivity of 95dB, combined with large neodymium magnets for efficient heat dissipation.

It generates an average of 130 dB of output, making it easy to match up with its high efficiency horn tweeter.

Thanks to its special spider composition, no distortion occurs at high excursion, while its silver tinsel lead wire is capable of high current, providing exceptional reliability and dynamic sound.

This 6.5″ coaxial ( horn speaker ) is capable of high output levels
and comes with a separate midbass speaker and horn driver for two
amplifiers.

The separate midbass speaker is designed to handle lower frequencies,
providing a rich and full bass sound, while the horn driver focuses on
delivering clear and precise high frequencies. This division of labor
allows each component to operate more efficiently, reducing distortion
and ensuring a more balanced and dynamic overall sound quality.

Its incredible output capabilities make this coaxial one of the loudest speaker on the market!

PRV Audio 6.5″ Coaxial Speaker Neodymium MT6CX580-NDY-4 Full Range 2-Way Motorcycle Speaker

How to Install them:

This Coaxial speaker will need 500 Watts RMS per speaker for its low frequency and 80 Watts RMS per driver for its high frequency with recommended HPF using PRV Digital Signal Processor DSP

  • 95 Hz at 18 dB per octave filter Crossover / BT18 for low frequency component
  • 1400 Hz at 18 dB per octave filter Crossover / BT18 for high frequency component

Recommended LPF for speaker is 6,000 Hz at 18 dB per octave filter Crossover / BT18 or you may set it lower to 2000hz depending on the other components in your system.

One Amplifier

2 Speakers Setup – 1x MDX2000.2 at 2 Ohm, 2 speakers in parallel into CH1 and 2 Drivers in parallel into CH2

One Amplifier

4 Speakers Setup – 1x MDX2000.4 2 Ohm, 2 speakers in parallel per CH1 and CH2 / 2 Drivers in parallel per CH3 and CH4

Reach the highest output level by following these installation recommendations for your coaxial with two amplifiers application!

Two Amplifiers 4 Speakers Setup

Speaker Amp 1x MDX2000.2 2 Ohm 2 speakers in parallel on each channel, giving each speaker up to 500 Watts each

Driver Amp 1x QS400.4 2 Ohm 2 drivers in parallel per bridged channel, giving each driver up to 100 Watts each

Technical Details

GENERAL SPECIFICATIONS

*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.

**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation.

***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.

  • Nominal Diameter 6.5″ (165 mm)High Freq. 1″ (25.4 mm)
  • Nominal Impedance 4 Ohm8 Ohm
  • Nominal Power Handling* 300 Watt 300 Watt
  • Continuous Program Power (RMS)** 600 Watts80 Watt
  • Program Power*** 1200 Watt 580 Watts
  • Max Peak Power*** 1200 Watt 160 Watt
  • Sensitivity 2.83V at 1m95 dB 106 dB
  • Recommended Hi Pass Crossover" "For Full Power Handling 105 Hz* *12db Per Octave Crossover 1800 Hz* *12db Per Octave Crossover
  • Frequency Response at -10dB 100 – 10 kHz 1.3 – 20 kHz
  • Voice Coil Diameter 2″ (51 mm) 1.75″ (44 mm)
  • Voice Coil Wire CCAW CCAW
  • Voice Coil Winding Depth11.0 mm N/A
  • Former Material KaptonKapton
  • Magnetic Gap Depth 8.0 mm N/A
  • Frame Material Aluminum Titanium
  • Magnet Type Neodymium

THIELE-SMALL PARAMETERS

  • Equivalent Volume
    • Vas
    • 5.77 l
  • Excursion (mathematical)**
    • Xmax***
    • 3.50 mm
  • Free Air Resonance
    • Fs
    • 105.9 Hz
  • Mechanical Factor
    • Qms
    • 8.54
  • Electrical Factor
    • Qes
    • 0.43
  • Total Factor
    • Qts
    • 0.41
  • Cone Area
    • Sd
    • 143 cm²
  • Mechanical Mass
    • Mms
    • 11.19 g
  • BI Factor
    • Bl
    • 7.16 Tm
  • Dc Resistance
    • Re
    • 3.0 Ohm
  • Inductance
    • Le
    • 0.178 mH at 1 kHz
  • Mechanical Mass Without Air
    • Mmd
    • 10.33 g
  • Mechanical Compliance
    • Cms
    • 0.202 mm/N
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

PRV MT6CX580-NDY-4 Coaxial DATASHEET Download
  • Overall Depth 4.37″ (111 mm)
  • Mounting Depth 3.93″ (100 mm)
  • Overall Diameter 6.48″ (164.5 mm)
  • Front Mount Baffle Cutout 5.62″ (143 mm)
  • Net Weight 4.18 Lbs (1.9 kg)
  • Shipping Weight 4.62 Lbs (2.1 kg)
  • Carton Dimensions WxLxH 7.6″ x 7.0″ x 5.12″ (193 x 178 x 130 mm)
PRV MT6CX580-NDY-4 Coaxial DATASHEET Download

WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.

Repair Parts

  • PRV RPD280Ti

    PRV RPD280Ti

    PRV RPD280Ti

    RPD280Ti

    Price:
    $22.91
    $27.49 $22.91
    Sale
  • PRV RKMT6CX500-NDY-4

    PRV RKMT6CX500-NDY-4

    PRV RKMT6CX500-NDY-4

    RKMT6CX500-NDY-4

    Price:
    $64.91
    $77.89 $64.91
    Sale
  • Rubber Cement Speaker Glue

    Rubber Cement Speaker Glue

    Rubber Cement Speaker Glue

    BLACK CEMENT GLUE

    Price:
    $19.99
    $19.99
    Out of Stock