Welcome to the new Dealer Portal for PRV Audio Group!

If you already have an account, please click the link below to enter your email to receive a code to login.

Log In

This is a dedicated wholesale site. Please click on the link below to access the consumer website. https://prvaudio.com/ https://timpanoaudio.com/

PRV 12MB1000FT Midbass

PRV 12MB1000FT Midbass

SKU: 12MB1000FT

PRV 12MB1000FT Midbass

PRV 12MB1000FT Midbass

SKU: 12MB1000FT

  • 12" Midbass - 8 Ohm
  • Ferrite Magnet
  • 97.5 dB - 1000 Watts
$139.91
$199.89

In stock
  • 12" Midbass - 8 Ohm
  • Ferrite Magnet
  • 97.5 dB - 1000 Watts

Free Shipping available on orders over $1,500.00 in the U.S.

View full details

Features

For high output speaker systems, PRV Audio’s 12MB1000FT mid bass is an excellent option capable of amazing performance. A great new addition to the Forte Series, where more power handling and less distortion on mid low mid bass frequencies is the key.

All this attention to detail in the 12MB1000FT makes it one impressive driver. With 97.5 dB efficiency and 1000 watts of continuous program power (RMS), this mid bass is ideally suited to be used as a stage monitor, or in auditorium, touring and outdoor systems. Also, its smooth response from 70 to 3,200 Hz makes it perfect for 2 or 3-way designs.

  • 3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 ohm
  • Ventilated voice coil gap reduces power compression
  • High Xmax for more Midbass output
  • 1,000 watts continuous program power rating makes high acoustical output
  • Excellent performance in 2-way or 3-way systems
  • Weather-resistant paper cone and dust cap
  • Also Available at 4 Ohm

A rigid cast aluminum frame with narrow spokes to minimize reflections back into the cone. In addition, the frame includes force cooling system openings which allows airflow to cool the voice coil.

To drive the voice coil, a large ferrite magnet with a very precise machined top and bottom plate has been used. The additional dual forced vent in the back plate of the coil allows this driver to handle up to 1000 watts RMS without issue.

Features a special high strength pulp composition paper cone designed to achieve the best possible linearity within the middle frequency range, which, together with a protective cone treatment dedicated to enhancing the dampening properties of the moving assembly, considerably improves its smooth frequency response.

The voice coil is wound on a 3″ glass fiber with aluminum wire, keeping weight to a minimum for an incredibly quick transient response. Engineered with 19 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability.

Technical Details

GENERAL SPECIFICATIONS

*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.

**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation.

***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.

  • Nominal Diameter 12″ (310 mm)
  • Nominal Impedance 8 Ohm
  • Nominal Power Handling* 500 Watts
  • Continuous Program Power (RMS)** 1000 Watts
  • Max Peak Power*** 2000 Watts
  • Sensitivity 2.83V at 1m97.5 dB
  • Recommended Hi Pass Crossover" "For Full Power Handling 110 Hz 12db Per Octave Crossover
  • Frequency Response at -10dB 70 – 3,200 Hz
  • Voice Coil Diameter 3″ (76 mm)
  • Voice Coil Wire Aluminum
  • Voice Coil Winding Depth19.0 mm
  • Former Material Glass Fiber
  • Magnetic Gap Depth 10.5 mm
  • Frame Material Die Cast Aluminum
  • Magnet Type Ferrite

THIELE-SMALL PARAMETERS

  • Equivalent Volume
    • Vas
    • 74.57 l
  • Excursion (mathematical)**
    • Xmax
    • 6.87 mm
  • Free Air Resonance
    • Fs
    • 52.72 Hz
  • Mechanical Factor
    • Qms
    • 13.35
  • Electrical Factor
    • Qes
    • 0.38
  • Total Factor
    • Qts
    • 0.37
  • Cone Area
    • Sd
    • 573 cm²
  • Mechanical Mass
    • Mms
    • 55.94 g
  • BI Factor
    • Bl
    • 16.54 Tm
  • Dc Resistance
    • Re
    • 5.7 Ohm
  • Inductance
    • Le
    • 1.00 mH at 1 kHz
  • Mechanical Mass Without Air
    • Mmd
    • 48.19 g
  • Mechanical Compliance
    • Cms
    • 0.162 mm/N
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

PRV 12MB1000FT Midbass DATASHEET Download
  • Overall Depth 5.76”(146.5 mm)
  • Mounting Depth 5.20”(132 mm)
  • Overall Diameter 12.40” (315 mm)
  • Front Mount Baffle Cutout 11.10” (282 mm)
  • Net Weight 16.8 Lbs (7.62 kg)
  • Shipping Weight 18.2 Lbs (8.25 kg)
  • Carton Dimensions WxLxH 13.5”x 13.5” x 7.0” (343 x 343 x 178mm)
PRV 12MB1000FT Midbass DATASHEET Download

WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.

Repair Parts

  • Rubber Cement Speaker Glue

    Rubber Cement Speaker Glue

    Rubber Cement Speaker Glue

    BLACK CEMENT GLUE

    Price:
    $19.99
    $19.99
    Out of Stock
  • PRV RK12MB1000FT

    PRV RK12MB1000FT

    PRV RK12MB1000FT

    RK12MB1000FT

    Price:
    $59.91
    $74.89 $59.91
    Out of Stock