If you already have an account, please click the link below to enter your email to receive a code to login.
This is a dedicated wholesale site. Please click on the link below to access the consumer website. https://prvaudio.com/ https://timpanoaudio.com/
PRV 8FR250 Fullrange
PRV 8FR250 Fullrange
SKU: SKU:8FR250
- 8″ Full Range – 8 Ohm
- Ferrite Magnet
- 93.5 dB - 250 Watts
In stock
Couldn't load pickup availability
- 8″ Full Range – 8 Ohm
- Ferrite Magnet
- 93.5 dB - 250 Watts
Free Shipping available on orders over $1,500.00 in the U.S.
Features
The PRV Audio FR Series sets a new standard of value in high-performance Fullrange speakers. The 8FR250 fullrange speaker is an excellent choice when space is at an absolute minimum, eliminating the need for a tweeter.
- True full-range response ( 50 – 18,000Hz ) makes it easy to add midrange and high frequency to any system
- Impressive choice for a compact, high output home, car, and professional audio systems – 8 Ohm impedance
- 93.5 dB – High efficiency, you do not need a lot of power to achieve extreme SPL levels
- Dual Cone Full Range Loudspeaker – Secondary “whizzer” cone improves high frequency response
The dual cone setup maximizes sound clarity. The primary cone handles lows to midrange frequencies while the smaller whizzer cone increases high-frequency response, covering a wide range of frequencies from 50 Hz to 18,000 Hz.
In addition to delivering superior performance across a wide range of frequencies, its innovative design sets it apart from traditional speakers.
These full-range speakers are focused on a combination of a small motor with a copper ring and an unique whizzer cone with a woven-cloth dust cap which provides exceptional clarity, deep mid-bass, high detail, and dynamics at high sensitivity.
Great option for car audio systems and simple portable speaker designs. Whether you’re a DIY audio enthusiast or a professional sound engineer, the FR series is the go-to choice for any audio project that demands exceptional sound quality and clarity all from a single speaker.
PRV Audio 8″ Fullrange Speaker 8FR250 PRO Audio Loudspeaker 250 Watts / 8 Ohm
Recommended HPF using PRV Digital Signal Processor DSP when using up to 250 Watts RMS musical power ( without clipping )
- 75 Hz at 12 dB per octave filter Crossover / BT12
- 65 Hz at 18 dB per octave filter Crossover / BT18
We do not recommend using a LPF at low power to take advantage of its high frequency response.
Technical Details
GENERAL SPECIFICATIONS
 
         
        
     
           
        *Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation.
***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.
- Nominal Diameter 8″ (203 mm)
- Nominal Impedance 8 Ohm
- Nominal Power Handling* 125 Watts
- Continuous Program Power (RMS)** 250 Watts
- Max Peak Power*** 500 Watts
- Sensitivity 2.83V at 1m93.5 dB
- Recommended Hi Pass Crossover" "For Full Power Handling 75 Hz** **12db Per Octave Crossover
- Frequency Response at -10dB 50 – 18,000 Hz
- Voice Coil Diameter 1.5″ (38 mm)
- Voice Coil Wire CCAW
- Voice Coil Winding Depth10.0 mm
- Former Material Kapton
- Magnetic Gap Depth 6.0 mm
- Frame Material Stamped Steel
- Magnet Type Ferrite
THIELE-SMALL PARAMETERS
- Equivalent Volume- Vas
- 21.2 l
 
- Excursion (mathematical)**- Xmax
- 3.50 mm
 
- Free Air Resonance- Fs
- 75.6 Hz
 
- Mechanical Factor- Qms
- 14.07
 
- Electrical Factor- Qes
- 1.10
 
- Total Factor- Qts
- 1.02
 
- Cone Area- Sd
- 227 cm²
 
- Mechanical Mass- Mms
- 15.0 g
 
- BI Factor- Bl
- 6.53 Tm
 
- Dc Resistance- Re
- 6.6 Ohm
 
- Inductance- Le
- 0.275 mH at 1 kHz
 
- Mechanical Mass Without Air- Mmd
- 13.1 g
 
- Mechanical Compliance- Cms
- 0.294 mm/N
 
EXTRA INFO
- Overall Depth 3.60″ (91.5 mm)
- Mounting Depth 3.33″ (84.5 mm)
- Overall Diameter 8.23″ (209 mm)
- Front Mount Baffle Cutout 7.12″ (181 mm)
- Net Weight 5.53 Lbs (1.6 kg) unit
- Shipping Weight 3.97 Lbs (1.8 kg)
- Carton Dimensions WxLxH 8.66″ x 8.66″ x 4.53″ (220 x 220 x 105 mm)
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.
 
                 
           
               
               
               
               
               
               
               
               
               
               
              

 
     
     
     
     
     
    

 
                     
                     
                     
          