If you already have an account, please click the link below to enter your email to receive a code to login.
This is a dedicated wholesale site. Please click on the link below to access the consumer website. https://prvaudio.com/ https://timpanoaudio.com/
PRV 6MR400CF-4 Midrange
PRV 6MR400CF-4 Midrange
SKU: SKU:6MR400CF-4
PRV 6MR400CF-4 Midrange
PRV 6MR400CF-4 Midrange
SKU: SKU:6MR400CF-4
- 6.5" Midrange - 4 Ohm
- Waterproof Carbon Fiber
- 95 dB - 400 Watts
In stock
- 6.5" Midrange - 4 Ohm
- Waterproof Carbon Fiber
- 95 dB - 400 Watts
Free Shipping available on orders over $1,500.00 in the U.S.
Features
The 6MR400CF-4 series was designed for Power sports applications, featuring a water-resistant design to ensure optimum performance taking into account the effects of the outdoor environment!
Ideal for upgrading your sound system in your boat, UTV, 4-wheeler, or motorcycle, this midrange speaker becomes the new standard in vocal reproduction for outdoor applications. Constructed of high-end materials like a carbon fiber cone, high-temperature voice coil, and huge neodymium magnet, this driver produces natural sound with remarkably low distortion.
- Water Resistant with true PRO audio midrange performance
- Damped carbon fiber cone lowers moving mass and minimizes unwanted resonances
- Handles 400 Watts – Endurance at Loudest Volumes
- 4 Ohm Impedance
- Also available in 8″ – 8MR450CF-4
The tailored response of the 6MR400CF-4 comes from its exotic yet supremely engineered carbon fiber cone that delivers the signature PRV audio combination of depth and accuracy on vocal reproduction.
Beyond good looks, this cone is extremely light, surprisingly rigid, and provides excellent damping to keep narrow peaks under control, resulting in an incredibly natural yet accurate sound.
PRV 6.5″ Carbon Fiber Speaker 6MR400CF-4 Midrange 400 Watts / 4 Ohm Water Resistant Loudspeaker
Recommended Amplifier configurations and crossover points:
2 Speakers – 1x MDX1200.2 1 Ohm, Bridged both speakers in parallel
4 Speakers – 1x MDX1800.1 1 Ohm, 4 speakers in parallel
Recommended HPF using PRV Digital Signal Processor DSP when using up to 400 Watts RMS musical power
- 145 Hz at 12 dB per octave filter Crossover / BT12
- 135 Hz at 18 dB per octave filter Crossover / BT18
If you have a super tweeter on your system the recommended LPF is 8,000 at 18 dB per octave filter Crossover / LR18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.
Technical Details
*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation.
***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.
- Nominal Diameter 6.51″ (165.5 mm)
- Nominal Impedance 4 Ohm
- Nominal Power Handling* 200 Watts
- Continuous Program Power (RMS)** 400 Watts
- Max Peak Power*** 800 Watts
- Sensitivity 2.83V at 1m95 dB
- Recommended Hi Pass Crossover" "For Full Power Handling 145 Hz 12db Per Octave Crossover
- Frequency Response at -10dB 120 – 12,000 Hz
- Voice Coil Diameter 1.5 (38 mm)
- Voice Coil Wire CCAW
- Voice Coil Winding Depth10.0 mm
- Former Material Kapton
- Magnetic Gap Depth 6.0 mm
- Frame Material Stamped steel
- Magnet Type Ferrite
- Equivalent Volume
- Vas
- 4.11 l
- Excursion (mathematical)**
- Xmax
- 3.50 mm
- Free Air Resonance
- Fs
- 131.1 Hz
- Mechanical Factor
- Qms
- 26.61
- Electrical Factor
- Qes
- 0.78
- Total Factor
- Qts
- 0.76
- Cone Area
- Sd
- 150 cm²
- Mechanical Mass
- Mms
- 11.19 g
- BI Factor
- Bl
- 6.32 Tm
- Dc Resistance
- Re
- 3.4 Ohm
- Inductance
- Le
- 0.151mH at 1 kHz
- Mechanical Mass Without Air
- Mmd
- 10.15 g
- Mechanical Compliance
- Cms
- 0.132 mm/N
- Overall Depth 3.13″ (79.5 mm)
- Mounting Depth 2.74″ (69.5 mm)
- Overall Diameter 6.51″ (165.5 mm)
- Front Mount Baffle Cutout 5.69″ (144.5 mm)
- Net Weight 4.20 Lbs (1.90 kg)
- Shipping Weight 5.07 Lbs (2.30 kg)
- Carton Dimensions WxLxH 6.89″ x 6.89″ x 3.54″ (175 x 175 x 90 mm)
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.
Repair Parts
-
Rubber Cement Speaker Glue
BLACK CEMENT GLUE
Price:Regular price $19.99Regular priceUnit price / perOut of Stock -
PRV RK6MR400CF-4
RK6MR400CF-4
Price:Regular price $34.91Regular priceUnit price / per$43.64Sale price $34.91Out of Stock