If you already have an account, please click the link below to enter your email to receive a code to login.

This is a dedicated wholesale site. Please click on the link below to access the consumer website. https://prvaudio.com/ https://timpanoaudio.com/

TPT-10500EQ 2 Ohm Amplifier

TPT-10500EQ 2 Ohm Amplifier

SKU: SKU:TPT-10500EQ 2 Ohm

Skip to product information

TPT-10500EQ 2 Ohm Amplifier

TPT-10500EQ 2 Ohm Amplifier

SKU: SKU:TPT-10500EQ 2 Ohm

  • Number of Channels: 1
  • RMS Power at 2 Ohm 14.4 Volts: 11,600 Watts RMS
  • RMS Power at 4 Ohm 14.4 Volts: 7,500 Watts RMS
  • Frequency Response: 10Hz ~ 15KHz
  • Dimensions (L x W x H): 11.57” x 20” x 3”
  • Weight: 16.50 Lbs
$589.95
$874.94

Out of stock

  • 2 Ohm Stable
  • 10Hz ~ 15KHz
  • 1x 10500 Watts RMS
  • 11.57” x 20” Wide
  • Number of Channels: 1
  • RMS Power at 2 Ohm 14.4 Volts: 11,600 Watts RMS
  • RMS Power at 4 Ohm 14.4 Volts: 7,500 Watts RMS
  • Frequency Response: 10Hz ~ 15KHz
  • Dimensions (L x W x H): 11.57” x 20” x 3”
  • Weight: 16.50 Lbs

Free Shipping available on orders over $1,500.00 in the U.S.

View full details

Features

Timpano 1 Channel TPT-10500EQ 2 Ohms Car Audio Amplifier

Small Footprint Technology!

Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact fullrange amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 85-95% in a compact Class D fullrange amplifier.

Additional Information:

  • Number of Channels: 1
  • RMS Power at 2 Ohm 12.6 Volts: 10,500 Watts RMS
  • RMS Power at 4 Ohm 12.6 Volts: 6,200 Watts RMS
  • RMS Power at 2 Ohm 14.4 Volts: 11,600 Watts RMS
  • RMS Power at 4 Ohm 14.4 Volts: 7,500 Watts RMS
  • Supply Voltage: 9.5 ~ 15 Volts
  • Frequency Response: 10Hz ~ 15KHz
  • Crossover Low Pass: 50Hz ~ 15KHz
  • Crossover High Pass: 10Hz ~ 700Hz
  • Signal to Noise: > 90 dB
  • Harmonic Distortion: < 0.9 % THD
  • Input Sensitivity: 0.2 Volts
  • Input Impedance: 27K Ohm
  • Impedance Output: 2 Ohm
  • Consumption with Signal Musical: 6.1A ~ 495A
  • Consumption with Signal Bass: 6.1A ~ 990A
  • Dimensions (L x W x H): 11.57” x 20” x 3”
  • Weight: 16.50 Lbs

Features:

The TPT-10500EQ offer 1 channel with advanced individual equalization features for Bass, Midbass and Midhigh, plus the traditional Level, High Pass and Low Pass features. Its Fullrange frequency response from 10Hz to 15KHz allows the installation of Subwoofers, Woofers, Drivers and Tweeters.

Use the guide Below for recommended applications, where you can get the full potential of your amplifier.

Before Installing:

You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier;

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;

• Always use 100% Copper cables and good quality connectors. This guarantees the sound’s quality and fidelity;

• To avoid damaging the cables, make sure that they do not touch sharp metal edges.Important: Use a 400A fuse 12 inches away from the battery as a safety precaution

The power rated data are based on equipment from the STETSOM laboratory. Frequency reference of 1Khz with THD+N to ≤10% in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant  load ) is not recommended.

Troubleshooting

NOTE: In the event that the amplifier stops working, unplug the speakers and turn the equipment back on.Amplifier must NEVER operate with the clipping LED ON !!  Abuse may cause damage to amplifier or speakers.If the problem persists, contact Timpano technical support through the online contact form at warranty

WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.